Best Practices For 3d Embroidery Digitizing Leads Over All Competitors

As we all know about 3D embroidery but most of the people are not aware of 3D embroidery digitizing. Let me tell you where the 3D name comes from. The height of any design increases by using the puff and it also increases the depth so a 3D effect created. The 3D effect looks cool in embroidery. But you need to practice more to improve this skill like many others. The demand for 3D embroidery has been increased from a few years, particularly with hats and caps. If you will practice more, you can produce the best results with less time and production costs.

For 3D embroidery, below are some best practices;

Best Practices For 3D Embroidery Digitizing:

  • Optimum Speed Of Machine:

First of all, you need to decide the optimum speed of your machine because the quality of the embroidered design is affected by it. You should slow your machine’s speed most of the time, unlike the normal orders. Every machine has its optimum speed. To figure out your machine’s optimum speed you have to try many tests. Use different speeds to find the best outcome.

  • Fabric Selection:

You should avoid using slippery and delicate fabrics for 3D embroidery because of two reasons. Firstly, if you are working on foam your fabric must be susceptible in-hoop movement. Secondly, the density of stitching should be higher as compared to normal designs. Consequently, stable and thick fabrics are preferred like caps. Lofty fabrics are not good for 3D embroidery like towels. Because their loft can fade the 3d effect and fails to create the captivating designs.

  • Selection Of Sharp Needles:

The use of sharp needles can make the perforations in the foam while working for 3D designs. Easy perforations mean that you can easily remove the foam afterward.

  • Foam Selection:

You need to consider your design’s height that you are going to embroider in the selection of foam. If you want more protruded and 3D effect then your foam must be thicker and the height of your design must be higher. It is very tricky to work on the thick foam because it will create louder designs. Thicker foam can hinder the smooth functioning of any machine.

  • Start With Normal Artwork:

Firstly you should start with the normal designs. You need to keep in mind all the essential factors that have an important role in the embroidery.

  • Learn Stop Program:

After creating the flat designs, you should stop the process. While dealing with 3D embroidery digitizing you needs to learn the stop program of your machine because it is the thing that you will use in your career a lot. If you are changing the colors, then you have to know that your machine is providing proper stops.

  • Outline The Design:

You need to create your design’s outline before applying the embroidery stitches. This outline can stabilize the embroidered area that you are going to use.

  • Removal Of Excessive Foam:

After the formation of your design get rid of the excessive foam. You can use heat for the removal of rigid pieces.

  • Test Runs:

Before starting any new design, try some runs. Then compare different options and choose that suits best with equipment and fabric.

  • Density:

The density of the 3D embroidery designs must be higher as compare to normal designs. Computerized machines can easily manage multiple densities. A design with high stitch density has an enhanced effect of 3D. 3D embroidery digitizing is a very tricky task. For this purpose, you should use long stitches. All the designs must have strong satin stitches and borders. But keep in mind that every design cannot work well on foam.

 

Leave a Reply

Your email address will not be published. Required fields are marked *